Explanation of SAP STAD Single Statistical Records/data

SAP STAD is one of my frequent used SAP transactions in performance analysis. STAD can show you where the time is spent over a list of technical components involved in a job/program execution, so it is often 1st step I would take to review performance of a program/transaction which finished recently. Following my previous post how to run and navigate through SAP STAD transaction, I would share my understanding of STAD data – that is the basis for you to use STAD to do performance analysis.

  1. Structure of STAD statistical data,
  2. Explanation of STAD statistical data and
  3. How to use STAD for performance analysis.

1 Structure of statistical data of a SAP transaction step

SAP has collected various statistical data to record performance of various technical components involved in executing a transaction step. To facilitate performance analysis, SAP groups statistical data into one main record and many optional sub-records. Whether a specific type of optional sub-records exists depends on context of transaction step and system parameter setting (see my post how to run ST03N) Following are the statistical sub-records I often deal with in my SAP environment:

  1. DB (sub records) – Statistical data related to database operations performance in a transaction step.
  2. DB procedure (sub-records) – Statistical data related to execution of database stored procedure in a transaction step. This is more important for SAP SCM boxes where LiveCache is used.
  3. Table (sub-records) – show most expensive tables accessed in the transaction step according to setting /stat/tabrec.
  4. RFC (sub-records) – show overview of RFC statistics from RFC client, RFC Server, RFC Client destination and RFC server destination sub-records according to setting /stat/rfcrec.
  5. Client Info (sub-records) – show origin of transaction step like job name, program name and system name.

Main record for statistical data of a single transaction step is like header record of a SAP business document. Main record contains statistical data related to time profile of transaction step, task and memory information and data volume involved in the transaction step. Sub-records are like details lines of a business document. One business document can have only one line of header record with 1 or more lines of detail records.

One execution of program can have more than one transaction step. SAP performance analysis normally focuses on the most expensive steps.

Explanation of STAD statistical data

SAP single statistical record has main records and many sub-records. SAP provides “corresponding buttons” in STAD detail screen to help you locate information of SAP statistical main record and sub-records quickly. Table 1 lists some frequent-appeared buttons showed in my SAP environment.


Related statistics


Time profile of transaction.


Database time breakdown according to type of database operations.

DB Procedure

Details on procedures calls to LiveCache.


Show memory usage at the end of step.


Database time – table profiles.


RFC statistics for RFC client, RFC Server, client destination and/or server destination sub records.


Data transferred to application.

Client Info

Origins – user, job, server which the transaction step belongs to.

Table 1 SAP STAD – navigation buttons

When a corresponding STAD sub-record exists, a related button would show up in SAP STAD Detail screen. Other buttons like “HTTP” other than what listed in Table 1 are not covered in this post.

2.1 SAP STAD – Time Profile of a Transaction Step

Top of SAP STAD “Single Statistical Records – Details” screen is the section of Analysis of time in work process section similar to Figure 1. You can back to the time profile screen by clicking “Time” button from other STAD details screens.

Figure 1 SAP STAD – Analysis of time consumption

Figure 1 is related to an individual statistical record of background step. Response time in Figure 1 is actually job duration which you would see in SM37 when the program (RMMRP000) is the only step of a background job. In Figure 1, all time components listed in “Response time” box are independent/exclusive.

Response time
= wait for work process time + Processing time( ABAP) + Generation time + Load times + Roll times for rolling in work data + Database time + Enqueue time for logical SAP locks + Roll wait time (not including task types RFC/CPIC/ALE). When DB procedure is used between application server and liveCache, a new component as “DB procedure” would be added to the Response time.

For dialog task, response time is measured at SAP application server from time when a request is received by the SAP application server to the time application server finishes processing and sending data to the client. Please note – Response time starts to tickle from the moment request is arrived at application server not the moment the request is sent by an user and it stops tickling at the moment when the application finishes processing and the last transfer of data from the application server to client is sent. The time used to send request to SAP application server and time used in sending last info back to client is not part of STAD response time but it is a part of end user’s online experience. Network and client impact on dialog user response time can be measured by GUI time and Net time (Figure 1 – right bottom corner under Frontend).For other tasks, Frontend statistics(GUI and Net time) is not relevant any more.

CPU time is not a separate time components but a sum of CPU utilization of each corresponding operation listed in “Response time” like ABAP processing, Program/screen load and generation, Roll-in and Enqueue operation except Database operation.

RFC+CPIC time: time spent by all RFC calls (as a client) in the transaction step. So this time can be bigger than response time if several long asynchronous RFC calls are initiated in parallel.

Wait for work process – time which the transaction step is put in the queue due to shortage of work process to the time when a free work process is available to execute the transaction step.

Processing time – time used in execute ABAP/IV statements.

Database time – time used by database to execute needed database operations like reading table changing existing table data or inserting new data into table. Database time is measured at application server side so it includes network time between application server and database server when applicable. So network latency can impact transaction performance when SAP server/instance used in executing the transactions is from a different server where database is in. Time used in reading data from buffered table at application server is not a part of “Database request time” but part of processing time. Time used between application server and liveCache (SAP SCM) is not part of Database time here.

For all other fields in Figure 1, you can get SAP online explanation in the transaction by placing the cursor into the corresponding data and click “F1”.

In normal ECC environment, significant time components of response time is processing time, database time and Roll wait time (when Synchronous RFC is used). Load time, generating time should be very minimal or zero—otherwise, this can indicate memory issue either setting or physical limit or there is a CPU contention.

After analysis of response time profile, you can navigate to specific time component/sub-record should you need further details.

Checking time profile of a transaction is often the first step of reviewing a business transaction/job performance. This can quickly point to area you should focus in SAP program/transaction performance analysis.

2.2 SAP STAD – Analysis of ABAP/4 Database Request

Click “DB” button in STAD details screen would bring you to screen similar to Figure 2.

This section breakdowns database time into different database operations so you can see individual database operation’s contribution toward database time and their performance.

Figure 2 SAP STAD – Database time breakdown on type of ABAP request

For details explanation on individual field in Figure 2 screen, please click corresponding data and use “F1” key to get SAP online document.

2.3 SAP STAD – Analysis of Table Access

This is to breakdown database time according to tables involved – showing types of operations on a particular table in a transaction step and how much time the transaction step has spent on the particular table. A program might has accessed many tables. For performance reasons, not all tables accessed in the transaction step but up to value specified by SAP online parameter stat/tabrec. Default setting is 5 which is enough for performance analysis.

Figure 3 SAP STAD – Database time breakdown on tables

Dir reads are referring to read table via full primary key. Other type of table reads are sequential read. Changes includes update, insert and delete database requests.

2.4 SAP STAD – Analysis of Remote Functional Call

When a transaction is a RFC step itself or when a transaction step has initiated at least one RFC call, then at least one RFC sub-records exists with the transaction step by default. You can click the “RFC” button to review RFC sub-records. You might get display similar to Figure 4.

Figure 4 SAP STAD – RFC calls over view con

Figure 4 screen is a RFC overview screen of a transaction step. It has two portions – client and server. Dependent on the step, you might see Client portion or server portion only. RFC Client shows 5 connections involved 3 destinations are having total 98 client call with calling time of 3,150 ms and execution time 2,713. RFC Server portion shows 1 connection to 1 destination has executed only 1 RFC call with call time of 27,368 ms against remote execution time of 27,367ms.




Number of connections between client and server system.


Number of distinct destination from RFC client/server destination sub-records – Destination indicates the system where the call is sent to by the client. Destination is normally an entry which is configured in SM59 in the client system where the RFC is initiated.


Numbers of distinct users from Client/Server destination sub-records.


Sum of number of Calls from Client/Server destination sub-records – For RFC client, this is number of calls made to the server. For RFC server, this is number of calls executed in the box where STAD is run.

Calling Time

Sum of calling time from Client/Server Destination sub-records. The time includes network connection/traffic time.

Remote Execution

Sum of remote execution time from each Destination sub-records. Time spent in executing the RFC in server side.


Sum of idle time between two RFC calls when connection is open.


Sum of Data sent to server for client call or Data sent back to client for server process based on RFC client/server destination records


Client – Sum of Data received from server; Server – Sum of data received from client. All data are sourced from client/server destination sub-records

Table 2 SAP STAD – RFC Overview fields explanation

If you can click each highlighted fields on figure 4, you can see available SAP statistics for RFC client, RFC client destination, RFC server and RFC server destination sub-records.

2.4.1 RFC Client Destination statistics

You click the highlighted number in the “Connections” field of client portion of STAD RFC overview screen, you would see 1 more client destination record similar to Figure 5.

Figure 5 SAP STAD – RFC client destination record details

A RFC client destination have information:

  • RFC type – synchronous(wait) and asynchronous(non-wait). Here is Synchronous.
  • RFC user name – SAP user account used to execute the RFC call. Here is bgomusr.
  • Destination – Where the RFC is going to be executed. Here is CC*USD.
  • Instance and IP address– The server where the RFC call is requested and its’ IP address.
  • Partner instance and IP address – The server where the RFC call is executed and its’ IP address.
  • Calls – number of RFC calls made to the destination at the transaction step.

Please refer to above table for Explanation for other fields like Calling time and etc.

Name of Destination is normally configured in SM59 except some SAP internally reserved destination name. Name of instance is what you can see in SM51 for SAP system. Calls is total number of call made over the connection to the destination. Calling time, Remote Exec time and idle time is sum of corresponding time from each calls over this open connection to the destination. Data send/receive time together with size of sent/received data are sum of corresponding data from each calls over this open connection to the destination as well. You might see SAP “transaction code” field as well in client destination sub-record when applicable.

2.4.2 RFC Client statistics

You click the highlighted number in the “Call” fields of client portion of STAD RFC overview screen, you would see 1 more RFC client sub-records similar to Figure 6.

Figure 6 SAP STAD – RFC client record details

RFC client shows

  • Call number – RFC call sequence. Here is 1 – means FM XIPAY_CC AUTHORIZATION is the 1st call to the destination CC*USD.
  • Destination – where the FM XIPAY_CC_AUTHORIZATION is executed. Here is CC*USD.
  • Function name – Name of Function module which needs to be executed by the server. Here is XIPAY_CC_AUHTORIZATION
  • Calling time – Duration of RFC call from begin to end as seen from the client side. Here is 2,647ms
  • Remote Exec.time – Time needed to execute FM XIPAY_CC AUTHORIZATION in the destination. Here is 2,501ms.
  • Idle time – Sum of idle time between two RFC calls. Here is 0 ms.
  • Data send time – time needed to send data to Server. Here is 980 bytes
  • Date receiving time – time needed to received data from Server. Here is 1,615 bytes.

The Destination might be a different SAP server/system but it could be the same server/system where SAP transaction STAD is executed.

2.4.3 RFC Server Destination statistics

You click the highlighted number in the “Connections” field of Server portion of STAD RFC overview screen, you would see 1 more server destination record similar to Figure 7.

Figure 7 SAP STAD – RFC Server destination sub- record

A RFC Server destination record shows

  • Caller user name – SAP user name which is used to start the RFC call. Here is bgomusr.
  • Caller client number – SAP client number of the system where the RFC call is started. Here is 4*
  • Destination – The system where the RFC call is executed.
  • Instance and IP address – specific server of the destination where the RFC call is executed and its’ IP address
  • Partner instance and IP address – The server where the RFC call is requested and its’ IP address.
  • Calls – number of calls made to the destination at the transaction step.

Other fields have similar explanation to what we have in client destination. You might see transaction code as well. Execution of the transaction led to execution of the RFC call to the destination.

RFC Server destination is to track total number of RFC calls which the server processes. There might be various remote function modules being called. So it does not make sense to track function module in this context.

2.4.4 RFC Server Call statistics

You click the highlighted number in the “Call” field of Server portion of STAD RFC overview screen, you would see 1 more Server destination record similar to Figure 8.

Figure 8 SAP STAD – RFC Server Sub-record

A RFC Server sub-record shows

  • Call number – RFC call sequence. Here is 1 – means FM APPLICATION_IDOC_POST_IMMEDIAT is the 1st call to the destination *01
  • Destination – where the FM APPLICATION_IDOC_POST_IMMEDIAT is executed. Here is *01.
  • Function name – Name of Function module which has been executed. Here is FM APPLICATION_IDOC_POST_IMMEDIAT.
  • Calling time – Duration of RFC call from begin to end as seen from the client side. Here is 27,368 ms.

Please refer to RFC client statistics for explanation on remaining fields.

The destination is one of SM59 configuration in client system which might be the different system from where the remote function module was executed. This indicates that you might not find destination configured in the system where you run STAD.

Last not least on STAD RFC statistics, I would like to mention controls which SAP has in place to limit number of RFC sub-records a transaction step should keep. One transaction step can make many RFC calls to many destinations. For performance reason, SAP does not generate a RFC sub-record for each Function called and for each destination involved. SAP online parameters stat/rfcrec is used to control number of RFC sub-records a transaction is allowed to keep. The Default setting is 5. When more than 5 RFC client calls are initiated from a transaction step, SAP would only keep statistics for the 5 most expensive RFC calls. When more than 5 destinations (actually connections) are involved in RFC calls in a transaction step, SAP would only keep statistics for 5 most expensive client destinations. The same goes with RFC server and RFC server destination statistics. A RFC call is more expensive if execution time is longer. Since the 5 most expensive calls are captured, those statistics are enough for RFC performance analysis. Increasing /STAT/RFCREC parameter could be dangerous to workload collector performance. It might impact system performance due to larger workload resulted from increasing this parameter.

2.5 SAP STAD – Task and Memory information

Clicking “Task/Memory” button, you would see screen similar to Figure 9.

Figure 9 SAP STAD – Task and memory information

Task and memory information sub-record shows

  • Terminal ID –Only available for SAP DIALOG work process. When it is available- it is either a name of an end user device like a computer name, IP address or server name from which the transaction step is initiated. RFC call, HTTP request, ALE and Dialog requests are executed in SAP via SAP dialog work process. Place your cursor at the terminal field, and process F1, you can see following standard SAP document “Name of the terminal or presentation server from which the dialog step was initiated and to which the
  • Terminal In/Out message: SAP online document “Number of Bytes required by the presentation server (terminal) for communication to and from the dispatcher work process to control the dialog.” Apparently, this field makes sense for Dialog request and HTTP request etc. but not make sense for RFC/ALE and background tasks. When dialog transaction is executed over a poor network connection or poor SAP GUI performance, large terminal in/out message can impact performance.
  • Work Process No: The number of SAP work process used to execute the transaction step.
  • Trans. – ID: a SAP internal assigned ID used to locate each specific execution of a SAP transaction or program. All steps of a specific executed program/transaction would have the same transaction-ID. All RFC child processes launched from the same transaction step with the same function module would bear the same transaction id even it is different from the parent program and each of them is having different session-id.
  • Session-ID: a SAP internal assigned ID used to locate a specific session where the transaction/program is executed. For GUI, each SAP GUI window is a session which has its own session-ID, All dialog transaction steps executed in the same SAP GUI window would have the same session-ID.

Terminal ID and session-id is used to locate the device/gui related to a transaction step of an online transaction, for background job, this would be replaced by job name. Transaction-ID is used to identify all steps/activities of an execution instance of SAP transaction/program. When a program is executed, one or business document can be created or changed.

SAP performance analysis normally focus on cutting runtime and increasing throughput. I did work several cases on cutting memory usage of customized ABAP program/transaction. But I found memory information from this tab is less helpful comparing with information stated in previous sections. I encountered cases where memory usage stated in STAD was much smaller than what it was reported by SM50. Apparently, SAP STAD cannot tell you how long a certain memory is occupied by the system etc. I normally use SAP tool /SDF/MON or SM50 to monitor memory usage of a transaction/process which gives a better picture of memory utilization over course of transaction/program execution.

2.6 SAP STAD – Bytes Transferred

This is to show size of data requested by SAP application to run the transaction step.

Figure 10 SAP STAD – Application data volume


2.7 SAP STAD – Client Info or Extended Passport

Here “Client” means the parent which is responsible for generating the transaction step which is different from RFC client which show what RFC call is started by the transaction step.

Figure 11 SAP STAD – Client info

This screen is telling you a lot of information about parent of the transaction step you are reviewing. Above screen shows that transaction step is result of executing a batch job – “S2C-OA_US_REPROC_ST64_ORD_SINGLE” under user “BGOMUSR” from system/server “*00”. All transactions executed by the same user from the same SAP GUI window has the same root context. All steps of a SAP job has the same root context as well.

In my version, system ID and server information are determined during the job creation. When SAP system is migrated, the old server name is still showed unless the business job is deleted and recreated via SAP transaction SM36 etc. after system migration.

3 SAP STAD and performance analysis

At the beginning of the post, it is mentioned that SAP STAD is used to review statistical data of a recent transaction. What can be considered “recent”? This is defined by system parameter stat/max_file. SAP stores stats hourly at OS level which can be overwritten after number of file reach what STAT/MAX_FILE specifies. Where the stat file is stored is controlled by another parameter stat/file.

At this point, hope this post has helped you to get a better understanding of SAP single statistical records. In my future post, I might share tips on how to use STAD for performance analysis and how SAP STAD tools can work with other tools in SAP performance analysis.

6 thoughts on “Explanation of SAP STAD Single Statistical Records/data”

  1. Thank you, this is excellent information. I am wondering if there is a way to identify certain tasks within a transaction. For example, if someone sorted the data while viewing a report. Is it possible to identify that type of task the STAD log?

    1. Good to know you find the post helpful. Stad itself does not tell you associated front end activity. Some front end activities would not interact with sap application server.
      However if you are very familiar with a sap program technical design, it might be possible to identify task of user based on screen number in some cases.

Leave a Reply

Your email address will not be published. Required fields are marked *